ReduSystems products create more light in the greenhouse
Removable coatings for a better greenhouse climate
All year round
Discover our products
Always optimizing sunlight
Get quick advice with ReduWizard

Optimal use of sunlight
all year round
Greenhouse cover in optimal condition

The ReduSystems cleaning agents ensure a perfectly clean greenhouse cover, on both the outside and inside. Problem-free removal of contamination but also of coatings that are no longer required.   Dirty glass not only causes loss of light. A layer of dirt also provides a hiding place and breeding ground for disease. Fungi, bacteria and viruses survive more easily when the glass is dirty.

Cleaning greenhouse interior
a Year round system 
Apply, combine and remove coatings every season for optimal use of sunlight

ReduSystems is the global leading brand in developing coatings and cleaners for greenhouse cultivation. The products control the incidence of natural light and heat to optimise the climate for the crop in every season - from a cooler climate in summer and more light in winter, to diffuse light and changing the light spectrum.

Reducing the greenhouse temperature

Shading agents reduce the temperature in the greenhouse by reflecting light and/or heat. They are a good way to improve the greenhouse climate if there is too much light or heat for the crop. The choice of agent depends on the crop requirements and the local climate.

Spraying shading agent on the roof of the greenhouse
Uniform light level is best for the crop

A diffuse coating ensures that the light is distributed better in the greenhouse, both horizontally and vertically. There are no more light and dark areas. Due to the evenness of the light, the crop experiences less stress and grows better. In addition, the light penetrates deeper into the crop.

applying diffuse shading agent
Light colour controls shape and development

ReduFlex coatings change the ratio of light colours within the PAR section. This makes it possible to control the plant's growth.  ReduFlex Blue is the first practical application in this series. This ensures more stem length for roses.  

Blue light reflective coating on the greenhouse deck
Optimal use of natural light

During a certain part of the year, light is the limiting factor for production. More light in the greenhouse is therefore very welcome. Transmission coatings ensure that more light enters the greenhouse. It increases production, improves product quality and reduces problems with diseases. They can be combined with other ReduSystems coatings.

More light in the greenhouse by improving transmission
Guide incoming light to the crop

During a part of the year, you want to protect the crop from excess light. But in other seasons, more light is needed. Reflection coatings are among the coatings that ensure that more light reaches the crop.

Heating pipes protected by pipe paint
The bright side of growing

Since 2013 ReduSystems has been publishing articles about products, how to use them and much more to improve your knowledge about greenhouse climate control and light transmission. Knowledge greatly appreciated by many growers, crop consultants and other parties within horticulture.

When should I remove the coating?
Light levels fall a little further every day in August. The decision as to when to remove a coating is partly rational and partly depends on the weather...
Read more
Coatings: what do they bring?
Investing in a coating boosts yield and improves product quality. The actual return on investment depends on the conditions. Willem Valstar from StarGrow...
Read more
Controlling growth with light: more in winter, diffuse in summer
For a grower, every ray of sunlight entering the greenhouse in winter is a bonus. Light is also welcome in summer, provided it is properly distributed...
Read more
Getting more light into the greenhouse in three steps
An old growers saying has it that 1% more light yields 1% higher production. Scientists have since shown that this is in fact a bit more nuanced: depending...
Read more
How much light does my crop need?
There is an optimal amount of light for every crop. Too little means that production will be low. But too much will put pressure on the yield and quality....
Read more
Use the right cleaning agent to remove a coating
Our coatings are developed to prevent them from quickly wearing off. When they are no longer useful at the end of the season, ReduClean is the only way...
Read more
Light gain in greenhouse after applying AntiCondens leads to more production
For crops that are switched in the summer, this is the ideal time to apply AntiCondens to the inside of the greenhouse cover. It is a good preparation...
Read more
Save time and energy with water-based PipePaint
The paint on heating pipes in greenhouses is constantly exposed to humidity, residues and mechanical loads. As a result of this wear and tear, the pipes...
Read more
AntiCondens: careful application gives the best results
With AntiCondens, you optimize the incidence of light in your greenhouse. Application is not complicated, but it requires care. Our instruction video demonstrates...
Read more
Cookie policy

To offer you a better and more personal experience on our website, we use cookies and similar techniques. By use of these cookies your surfing behavior on our website can be monitored by us and certain third parties. Want to know more? Visit our cookie policy page.

Accept cookies Adjust settings